MoCA 2.5 Coax to Ethernet Adapter

HT-EM4

Get a reliable, super-fast connection for your HDTV or gaming console without running wires! This easy-to-use coax to Ethernet adapter uses your home’s existing coax wires to create a wired Ethernet backbone with speeds up to 1 Gbps. Enjoy reliable, higher speeds for 4K HD streaming, lag-free gaming, reliable video conferencing and working from home.

Get Better WiFi

Get the WiFi networking performance you need with speeds up to 1 Gbps. Hitron’s HT-EM4 MoCA 2.5 Adapter transforms your existing coax TV outlets into Gigabit Ethernet ports to create a multi-lane “super-highway” between your home’s router and Wi-Fi access points. Faster speeds into your WiFi Access points means faster WiFi out to all of your devices, throughout your entire home.

Better Streaming

Enjoy increased network speeds and performance for pristine 4K and HD streaming. No more stutters, frame freezes, or getting bumped down to standard resolution.

Better Video Conferencing

Get smooth connections and glitch-free meetings, even when the whole family is online at the same time! Hitron’s HT-EM4 creates a fast and reliable wired connection to your home office. You’ll have smooth streams and glitch-free meetings, even when the whole family is at home and online at the same time.

Better Gaming

Get lag-free gaming and low latency by creating a super-reliable wired connection without running wires! The HT-EM4 transforms your existing coax wiring into an extremely reliable and fast a wired connection, ready for your gaming console, and incredibly fast speeds so you can stay on top of the leaderboard!

 

Plug n’ Play Set Up – No Configuration Required

So simple – just plug it in.  No software to install or configuration required.  Plug one HT-EM4 adapter to any coaxial port in your home and it automatically establishes a MoCA link with your gateway. Then use the Ethernet port to connect your HDTV, gaming console, PC or any other Ethernet-enabled device. Sit back and enjoy perfect 4K streaming, lag-free gaming, and high-speed networking!

 

Gigabit Speeds

Hitron’s HT-EM4 MoCA Adapter transforms your home’s coax cable into an extremely reliable, wired 1 Gbps Ethernet backbone, sending full bandwidth to every room in your home.  The HT-EM4 MoCA Adapter is compatible with any Ethernet router and with practically any device that has an Ethernet port including gaming systems, 4K streaming media devices, HD audio streamers, personal computers and much more.

 

Secure and Reliable

The HT-EM4 uses hardware DES and AES encryption to keep your data safe from unauthorized access. You can augment your home’s Wi-Fi network with the reliability of a wired connection where ever you need it.

 

Two Coax Ports

The HT-EM4 provides two coax RF ports: one to connect to the wall outlet and one to connect to your TV or cable set top box. As a result, you get blazing networking speeds over your coax network, without having to sacrifice a cable outlet in the home theater.

 

Learn More about MoCA

Does Coax Cable Slow Down Internet?

If you are experiencing slow Internet and you think it is because of a coaxial cable (coax) cable issue, check to see that the coax cord has a tightly fitted connection to the coax jack and your modem/router. If the coax cable is loose, your cable Internet connection...

How Fast is Ethernet Over Coax?

Ethernet over coaxial is designed to boost your home Internet speeds faster than you can get with Wi-Fi alone. But first: Ethernet over coaxial is a family of technologies that supports the transmission of Ethernet frames over coaxial cable. MoCA technology is the...

How Do I Convert Coax to Ethernet?

You can convert coaxial to Ethernet by using an adapter. Specifically, you would need to use a MoCA adapter.   Defining Coax Coaxial cable, sometimes abbreviated as coax, is the type of wiring in your home that delivers cable TV, Internet and other services. The...

Is Coax Better Than Ethernet?

Like with many things, there can always be a better solution for the situation you are in or the challenge that you are facing. When it comes to whether or not coax is a better solution than Ethernet, well, it depends. They both have strengths depending on your needs....

Do Coax to Ethernet Adapters Work?

Coax to Ethernet is also known as MoCA or Multimedia over Coax Alliance. It is a wired solution that makes your Wi-Fi better. With MoCA adapters, you can still enjoy wireless Internet and also get a wired-like experience with reliable, solid Internet connection. And...

Key Specs

  • MoCA 2.5 for speeds up to 1 Gbps
  • Two coax F-type connectors and one Ethernet RJ-45 10/100/1000 Mbps connector
  • Compact size discretely fits in any home theater (110mm W x 70mm H x 25mm D)
  • Upgradable software over web-based GUI
  • Intuitive LEDs clearly display device and network status
  • Hardware DES and AES Encryption to keep your data safe from unauthorized access

Get blazing fast wired speeds with the HT-EM4 MoCA 2.5 Coax to Ethernet Adapter.

*Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates. **Actual speeds will vary depending on the condition and noise found on the coaxial wiring. 1 Gbps is the maximum throughput to end devices. The maximum throughput over the MoCA network is up to 1 Gbps. Theoretical data throughput numbers are based on maximum, theoretical PHY throughput for MoCA 2..5. Actual throughput will vary based on the condition and noise found on the coaxial cabling within the home as well as the type of Ethernet Adapter supported on each computer or other device.

FAQ

How do I contact Technical Support?
Please click on the Blue Circle with 2 message boxes in the bottom, right-hand corner of this page. A chat window will open and you will be connected to Support.
Do I need more than one HT-EM4 adapter?
You only need one HT-EM4 if you have a MoCA-capable broadband device. If your router does not support MoCA, you will need two MoCA devices, one for your router and one for the device that you want to connect to, a gaming console for example.
How fast is MoCA 2.5?
MoCA 2.5 can reach theoretical speeds up to 2.5 Gbps over the Coaxial Network and up to 1 Gbps to the end device.
How many MoCA devices can I have connected to my home network?

Your network can connect a total of 16 MoCA devices including the adapters.

What is the maximum distance between MoCA devices?
The total maximum distance between devices is 300ft including in-wall wiring.
Is the HT-EM4 compatible with satellite services?
No, the HT-EM4 is compatible with cable services, but not satellite services such as DirectTV or Dish Network.
Can I connect an OTA antenna to the adapter?
No, HT-EM4 will not descramble television signals or convert the signal to Ethernet.
What end-devices are compatible with the HT-EM4?

Virtually any device that has an Ethernet port, including Xbox, gaming systems, computers, streaming media devices and more.

After connecting a splitter to my network, it no longer works. Why?
The HT-EM4 works in the frequency range from 1175 to 1625MHz. Please make sure the splitter that you are using can cover this range.
Why is my connection speed so slow?
If you are experiencing performance/throughput issues with the connection to your HT-EM4, you should validate the following:

  • Run a speed test of your incoming broadband service to ensure that the broadband service is healthy.
  • Check for faulty/outdated/incompatible coax splitters and connections within your MoCA network that may be restricting speeds.
  • Check that other devices connected to your MoCA network are not hoarding available bandwidth.
  • Check that the Ethernet cable is Cat5E/6 compliant.
  • Check to confirm that your device has a Gigabit Ethernet port (1000Mbps) and not Fast Ethernet (100Mbps).
Doesn't the pre-existing coaxial cable already have the capability of providing Internet?
Yes, but you still need a Cable Modem. The HT-EM4 is a home networking solution and is designed to use your existing coax wiring to extend an Internet connection to areas within your home.
Why can’t I access the internet when connected to the HT-EM4?
If the POWER and LINK LEDs are on, but the MoCA LED is off:
— Ensure that the coax cable is connected to the RF port with the picture of a coax connector

If the POWER LED is on, but the LINK LED is off:
— Please wait up to 90 seconds for the HT-EM4 to establish a network connection.

Why do none of the LEDs turn on?
The HT-EM4 is not receiving power.

  • Ensure that you are using the correct power adapter that came with the device. Using a power adapter other than the one that came with your HT-EM4 can damage the HT-EM4.
  • Make sure that the power adapter is connected to the HT-EM4 and the electrical outlet correctly.
  • Disconnect and re-connect the power adapter to both the electrical outlet and the HT-EM4.
  • If none of the above steps solve the problem, consult your vendor as there might be a fault with the device.

Let me know when it’s available to purchase on Amazon: